|
 |  |  |
Thermoformable ESD, Anti-Static and Conductive Packaging Films.
|
|
| PRODUCT DATA INFORMATION SHEET:
(PRODUCT DATA) IPF-4500 HDPE
IPF-4500 is a thermoformable HDPE, Anti-Static packaging film, designed for the "Mechanical and ESD" protection of
heavier electronic components. When used in conjunction with a box it offers
equal or greater protection than the "foam and box" systems presently
being used. Thermoformed parts are stackable, greatly reducing warehouse space,
shipping costs and waste to landfill sites. The material is available in
thicknesses of 20 to 50 mil.
|
| PRODUCT PROPERTIES |
Test Method |
Units |
Typical Value |
| Surface Resistivity |
EIA - 541 |
ohms/sq. |
1010 |
| 12% RH |
EOS/ESD S.11.11 |
ohms/sq. |
108 to <1012 |
| |
|
|
|
| Static Decay |
EIA – 541 |
sec. |
0.1 |
| 12% RH |
|
|
|
| Property |
Test Method |
Typical Value |
| |
|
SI Units |
English Units |
| Density (for natural) |
ASTM D 792 |
0.957 G/CM3 |
|
| Tensile Strength (@ yield) |
ASTM D 638 |
26.9 Mpa |
3,900 psi |
Elongation @ Break
(50 mm/min) |
ASTM D 638 |
>800 % |
|
| Flexural Modulus |
ASTM D 790 |
1080 Mpa |
160,000 psi |
| Low Temperature Brittleness |
ASTM D 746 |
< -70o C |
< -94o F |
| Water Absorption, 24h, 1/8" thick (%) |
ASTM D 570 |
|
< 0.01 |
| Specific data
depends on the colour master batch and additives included in the
sheet.
The properties and specifications above are
intended to provide general guidance only and are in no way to be construed as a
warranty or guarantee of any physical or material characteristic. 06/98
|
Copyright © 2001 Integrated Packaging Films (IPF) Inc.
Site by
CleverNet
|
|
